|
pro-50 shifter Dust Boot
I am looking for a dust boot (shift turret) for my newly installed Pro-50 shifter on my TKO II trans that resides in a Superformance Cobra. Does any body have a Ford part number for this dust boot? Does anyone know what year Ford Mustang Cobras used the tremec transmissions?
|
I'd be interested to see if anyone has an answer to this. I just tried to install my shifter boot (std. cobra boot and trim ring) over my Pro 5.0 shifter and the boot and trim ring will not fit over the two bolts that are designed to limit the throw of the shifter (the bolts that are at 12 o'clock and 6 o'clock on the shifter). Has anyone else had this problem? Is there a bigger boot and trim ring that you can use or should I just cut down those two bolts somewhat?
|
On my FFR I had to notch the tunnel slightly to allow for the PRO 5.0 shifter stop bolts to fit. The standard boot and trim ring fit nicely.
Mike |
if I understand the problem correctly, you're having trouble stretching the boot over the stop bolts. If it were easy it wouldn't be any fun! The act of getting the boot over the bolt is only an issue because, unless you've removed the tunnel, you've got no easy way to get leverage. I think on mine, I took a big screwdriver, wrapped several layers of masking tape over the head of the screw driver, and than pryed the boot over the bolts from the inside of the boot, in other words, depressed the screwdriver into the outer perimeter (from the top) and then pulled it over the bolts.
|
dust boot
If you need a dust boot for the Pro5.0 that keeps dirt etc. out of the shifter mechanism, but fits under your stock shifter boot try performanceunlimited.com
|
| All times are GMT -7. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: