|
T45
Hi Guys,
Could someone please tell me if it is possible to mate a T45 to a 84 windsor block? If it is possible is there a source for adapter plates etc. Any help would really be appreciated. Regards Shane :confused: :confused: |
Shane, did you ever get any information on this. I just got a good but cheap T45 & am asking the same thing for a '72 302/5.0 block.
|
Hi Scott,
sorry I drew a blank on this one so have gone with a WCT5 for the moment, it should get me on the road then upgrade to a 3550 Regards Shane. |
I am told that it won't work. The T45 BH bolt pattern, although close, is not the same as the 302 block (and T5 BH).
I have not found out if the input shaft or pilot bearings are compatible. But that is irrelevant if the BH won't bolt up. |
Hello Scott,
Thank you for your reply, that is pretty much the info I have gleaned after hours on the web, so I am going for a T5 which should get me airborne till something better turns up!! Regards Shane |
Better late than never....
No you cannot mate a t-45 to anything other than a Mod-motor (4.6 or 5.4L) Reason why is that the bellhousing that matches the mod motors is not removable from the transmission. The Bellhousing is also a essential part of the T-45's casing. I own a t-45 and a t-5 as well as a 302 and 4.6L No mixing and matching was possible. |
| All times are GMT -7. The time now is 09:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: