|
TKO and Speedometer going in reverse
I have autometer speedometer model 201005, my problem is that my speedometer runs in reverse, with my TKO transmission. Does anyone have this same problem? Checked my installation instructions and show a part# for a reversing adapter. Who do I need to call to buy one. I checked online at autometer and they don't sell to common folk. Any help would be appreciated.
|
Hi Blittleton,
You need a cable reverser. Call me, I have them. |
I got an adaptor at first that was set to turn the wrong way. I had to remount the exit gear on the other side to make it work right. Mike is right, you need an adaptor with a Tremac. For an old post on this subject see http://www.clubcobra.com/forums/show...ht=speedometer
|
| All times are GMT -7. The time now is 03:04 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: