|
Parts sources for B/W T-10's
I am looking for a source to purchase internal parts such as gears, shafts, sliders etc for a 1963-64 Ford application T-10. Not just the rebuild kit.
Any help would be appreciated. Rick |
David Kee can, most likely, help you out. If you tear it down, go through everything. I would replace every gear except, maybe, first. All synchros, too. These boxes are notorious for jumping out of gear. Anyone who owns a pre '63 Corvette will attest to that. There is no quick fix, although the gears are not that expensive.
|
Everything was replaced except for the gears themselves. All sliders, syncros, shafts, needles, thrust bearings and thrust washers. Thought I had it perfect, even set the thrust clearance on the layshaft.:mad:
Rick |
| All times are GMT -7. The time now is 08:34 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: