|
Transmission speedo "o" ring number
Does any one know the ford part# for the "O" ring that fits on the speedometer cable/gear where it goes in the transmission? Oh yea it is a Tremec. If not a Ford # how about a parker "O" ring number???
|
You can just use a regular rubber o-ring. Try the local Westlakes/hardware store or NAPA. You may also apply just a pinch of silicone as well.
|
If that does not work and you still want the part number for the Tremec then call and ask for "Red" at McLeod, he knows everything and will help you out with more info that you want. Great resource of knowlege about any car or part # you can think of.
Best time to get him is from 10:00 AM (PST) to 1:00 PM (PST). McLeod number is 714-630-2764 Good luck, hope it helps |
| All times are GMT -7. The time now is 02:32 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: