|
T56 Shifter relocation help
I've read some threads on relocating the shifter on the T56. I can't seem to locate the information using the links provided. Can anyone help with finding this information? I found a place that has the parts, and would do all the work. But they have a 6 month waiting list. Would could some help.....
Thanks, Nick |
1 Attachment(s)
I purchased my T56 tranismission and had the shifter moved to the forward position by Shafi Keisler at Keisler automative. http://www.keislerauto.com/ I also added a Tilton hydrulic through out and Keisler could have preped the adapetr plate to recieve the Tilton. Keisler was working on his own hy through out bearing and it may now be available. Also Mike Forte listed in the advertizer list on this web page can do this work.
|
Hi Nick
a number of us down here in Aussieland have done the conversion. Send Aussie Mike a PM and he will set you staight on doing it yourself. Its not too bad if you can use a grinder & hammer(just kidding) but Mike is great on advise in this area. Cheers Leeroy |
Thanks for the help. I did call Keisler but they had a long wait. I'm fairly handy with a hammer, so maybe Aussie Mike's info will help me out. What rear end ratio are you running? I'm running a Ford 9" that needs rebuilding. 6th in this trans is .50 to 1. Just got my Midstates chassis last week, the engine will be here end of june. It's been many years since I've done something like this.... Last cool car I had was a new 1969 Mercury Cyclone 428CJ... I'm sure I'll need more help...
Thanks, Nick |
Nick, I put 3.55 in my rear end. I think this should give me a kick ass 1'st, 2nd and 3rd but still give me great performance in 5th around town and 6th for the freeway cursing.
You should know that for the shifter to work in the forward position you ill have to move the internal linkage up from the rear. Good luck. |
Can't wait to long
I sent Aussie Mike Email. I'll wait a few weeks, if I don't hear from him Ill ship the trans off to Keisler..... Sure helps to know others have had good luck with getting something done you would like to do.
Nick |
| All times are GMT -7. The time now is 12:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: