![]() |
Rebuild book for C6
Does anyone know of a good book for servicing/building up a C6 tranny? I have a C6 in the cobra with reverse shifting manual valve body. I am changing engines to a 427 CO and thought that this would be a good time to beef up the tranny. It was beginning to slip a little when I shift between 2nd and 3rd at WOT. I was thinking maybe a heavy duty cluck pack or something. Any help, anyone ?
Paul |
Look in EBAY. Do a search on "Oregon Performance Transmissions" they have performance rebuild kits, other parts, and a good C6 service manual cheaper than I have seen elsewhere. I bought several items from them for another project, but haven't had the chance to finish the work yet.
|
Dave
Thanks for the info ! Paul |
| All times are GMT -7. The time now is 09:30 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: