Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Transmission Talk (http://www.clubcobra.com/forums/transmission-talk/)
-   -   Torque to ground (http://www.clubcobra.com/forums/transmission-talk/54531-torque-ground.html)

Roy Landers 06-09-2004 06:36 AM

Torque to ground
 
What is the weak point in the driveline in the SPF cars. Present set up is TKO II and centerforce clutch, 8.8 rearend. The 514 stroker is rated at 600 HP, Torque?. Will 15 inch slick damage any of the driveline components with improved traction. TKO II is rated for 475 ft pounds.

Edbo 06-09-2004 06:45 AM

If you still have the 28 spline axles, that's probably your 'fuse'. Axles are cheaper than transmissions!

Ed


All times are GMT -7. The time now is 11:32 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: