- -
efi302 5speed
(
http://www.clubcobra.com/forums/transmission-talk/72338-efi302-5speed.html)
| ollykiwi |
08-29-2006 03:19 AM |
efi302 5speed
anyone running 302efi with manual 5speed?was wondering if i could get an idea of clutch pedal length to work the manual cable clutch.my setup at the moment is really stiff.any ideas?also pivot to cable distance or ratio?
|
| simon clemens |
08-29-2006 05:49 AM |
I set up a hydaulic clutch. I think it is better this way because of the ease of installation and less pedal friction to opperate compard to a cable setup.
Probly not much help to you though, sorry
|
| ollykiwi |
08-30-2006 03:19 AM |
yeh thanks.was thinking of that as another option.can you buy a conversion kit or do you have to mix and match?
|
| ollykiwi |
08-30-2006 03:19 AM |
yeh thanks.was thinking of that as another option.can you buy a conversion kit or do you have to mix and match?
|
| simon clemens |
08-30-2006 08:11 AM |
I modified an existing hydraulic clutch pedal box out of a mitsubishi starion, and just grafted the setup to suit my needs. I made brackets to mount the master & slave cylinders. I would never concider to use a cable setup ever again... hydraulic is the only way to go!
I'm not sure if there is a conversion kit or not, but I do know you can buy master & slave cylinders new and they are not that expensive.
Simmo
|
| ollykiwi |
08-31-2006 02:47 AM |
yeh had already thought of things to do along those lines.will look into it a bit more.i figure the slave cylinder needs to move the thrust arm about 40mm,does that sound about right?
|
| dbn04 |
08-31-2006 04:03 AM |
olly,
i have the cable setup and it is very easy, had cable made to length, the only prob i had was to close to exhaust, melted a couple cables :mad: sorted with heatshield all good now:) .
ps motor and trans from x-r8
|
| ollykiwi |
09-02-2006 02:47 AM |
hey dbn04
.mine is same setup.looking for pedal length and pivot to cable if you changed it much.i have used the xr8 pedal but shortened it.i may have to go back to original length to ease the leg strain.how bout you?
|
| All times are GMT -7. The time now is 11:06 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
