| MCOULTER |
09-07-2006 10:13 AM |
SPF Shifter and TKO 600
The holes in my original style shifter does not match up with the holes in the TKO shifter stem. Anyone else have this problem?
|
| xlr8or |
09-07-2006 02:03 PM |
What trans were you running before?
I have swapped a 3550 for a TKO600 and it was a direct fit on the shifter handle.
|
| sllib |
09-07-2006 02:32 PM |
I bought a Steeda shifter for a TKO but the holes were too small for my T-600. I just opened the holes up a little with a drill and it slides right on. As long as you're not constantly bangin' your shifts I don't see where it hurts anything.
Bill Stradtner
|
| Jimi G |
09-07-2006 04:01 PM |
That is what I would recommend also, you can use a die grinder and open up your holes enough to fit the pattern of the TKO shifter. Try and not open them up too much, or your shifter could move a little.
|
| MFE III |
09-07-2006 05:36 PM |
I had the same problem. I just had to drill out the holes on my shifter to match the size on my TKO 600. Easy job on a drill press!
|
| All times are GMT -7. The time now is 12:28 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
