|
Part number for throwout bearing
Anyone have a part number for the right throwout bearing for a Tremec TKO 600 hooked to a 427 FE? Ideally Centerforce, since that's the pressure plate/clutch I have, but other brands are fine as well.
Thought this would be a straight forward search on Summit, but all I get is hydraulic concentric bearings. Also, I assume the shaft size they are looking for is the input shaft vs the diameter of the bearing housing that the bearing actually rides on? Thanks! Scott |
The BCA number is N1439 hope that helps. jimig@standardtransmission.com
|
| All times are GMT -7. The time now is 02:37 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: