|
Glad it helped you. I picked up that trick and many other little things working in my Dad's shop. Now he works with me in my shop and still has little tricks that save the day.
Thank God he appears to have had a full recovery from what ever he had when I was a teenager. Now he is full of great ideas but way back then I worried about him a lot. LMAO !!! |
Liquid nitrogen on the pin works magic - you need good full leather gloves and it burns real deep fast - doctors use it to burn out warts.
when you go to buy it take a large thermos - and don't screw the cap on too tight as the gas that boils off need to go some where. Great also for fitting interferrence bushes - drop the bush in the liquid nitrogen - then slip into place. Be real careful with it! the gloves are there to give you enough time to wash it off with lots of water before it burn through the gloves. Also safety glasses, apron and cover boots essential. It flows like water so make sure if you pour on to the pin it has some where to flow. Pratice with water first but make sure its dry before using the liquid nitrogen. |
After much swearing, I got my dowel pins out of the block yesterday. Using a tungsten carbide grinding bit, I ground flat spots into them and twisted them out with a large pair of channel lock pliers.
The real question is why do the aftermarket block suppliers even use these short, useless pins in the first place? It would make way more sense to supply the blocks pin free! JMO. phil |
| All times are GMT -7. The time now is 01:54 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: