Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Transmission Talk (http://www.clubcobra.com/forums/transmission-talk/)
-   -   26 spline clutch disc for TKO-600? (http://www.clubcobra.com/forums/transmission-talk/86121-26-spline-clutch-disc-tko-600-a.html)

Dangerous Doug 03-17-2008 01:16 PM

26 spline clutch disc for TKO-600?
 
TKO-600's have a 26 spline input shaft. Ford Racing nicely points out the need to use a 26 spline clutch disc, but offers no such part.

Where do I get a 26 spline clutch plate for a TKO-600?

patrickt 03-17-2008 01:19 PM

Quote:

Originally Posted by Dangerous Doug (Post 825660)
TKO-600's have a 26 spline input shaft. Ford Racing nicely points out the need to use a 26 spline clutch disc, but offers no such part.

Where do I get a 26 spline clutch plate for a TKO-600?

McLeod, Centerforce, they all offer them -- just give them a call.

lineslinger 03-17-2008 02:35 PM

This company has been very helpful to my needs, good analysis, patient, fairly quick shipping. http://www.thedrivenman.com/
Also there is member in here, jimig@standardtransmission.com who is knowledgeable and very helpful.

Burgs 03-17-2008 02:40 PM

It's a GM disc.

wrench87 03-17-2008 04:17 PM

i dont know if this helps, but i bought a ram aluminum flywheel from mike forte from fortes parts connection part number 2519 he has ram drill them out for the chevy pressure plate and i purchased a a ram clutch kit part number 98764, he swaps out the chevy throw out bearing for the ford unit and i use the ford fork with an extender on the end for the cable for proper alignment.

Dwight 03-17-2008 06:05 PM

I have bought several trannies, bell housing, etc., from D&D. Best price and great service!
Give them a call.
http://www.ddperformance.com/

Dwight

Cobra 29 03-17-2008 06:53 PM

Got 26 spline disk and reused good pressure plate
 
After taking out my old 3550, I saw that I had a little used, good FMS pressure plate made by Centerforce. So I researched the Ford Racing Catalog and found that the same dual friction disk was part number FMS-M-7550-T302. I ordered ths disk (only) from Summit. I installed it and have had no problems with my new disk and TKO600.

I purchased my TKO from Jimi at Standard Gear. He was very helpful.

Jimi G 03-18-2008 09:34 AM

Quote:

Originally Posted by Burgs (Post 825680)
It's a GM disc.

Bingo, just get the same size disk for a GM with 26 spline, if you can't find anything locally let me know I can get you fixed up. jimig@standardtransmission.com


All times are GMT -7. The time now is 05:31 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: