|
T-56 Speedometer
Hello,
I searched through the threads as much as possible, but still came up empty. Is there a way to convert a T-56 trans to use a mechanical speedometer? I thought I remember reading about some kit, but can't seem to locate it. Thanks in advance. Ron |
Check with our site TRANNY sponsors for sources. Gauge manufacturers also sell the electronis/mechanical adapters. I use the (011) or aftermarket transmission and not the OEM replacement tranny for this and other conversion/install reasons.
Sewe this link for some other points http://drivetrain.com/gmt56inst.html I have also found a 15 degree clocking issue as it interfaces with the scattershield or bellhousing. |
| All times are GMT -7. The time now is 02:02 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: