| boris_thespider |
06-16-2008 06:35 PM |
Centerforce dual friction question...
Can someone tell me if the Centerforce dual friction clutch uses dowel pins to the flywheel? If so, are they 1/4", 5/16" or what? Thanks...
Mike
|
| cobred |
06-16-2008 06:51 PM |
Not on mine, only the bolts.
|
| priobe |
06-16-2008 07:54 PM |
Mine either and I am running a Centerforce flywheel aluminum
|
| bobcowan |
06-16-2008 08:56 PM |
Yes, you should use dowel pins on ever pressure plate install, no matter who makes it.
I use a Fidenza alum flywheel, with three holes for the pins. Can't remember the size, though. Standard SBF size, whatever that is.
|
| BDR561 |
06-16-2008 09:28 PM |
I used pins on mine too. Don't remember the size...
|
| All times are GMT -7. The time now is 09:27 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
