|
Requesting help with throw-out bearing
While bleeding the clutch pedal assembly we had difficulty applying the clutch pedal. Upon futher investigation the throw-out bearing went directly through the centre force clutch. After pulling the trany, it became clear that the McLeod throw-out assembly bearing outside diameter was smaller than the inside clutch diameter. Further research on the McLeod web site I found that I need the following throw-out bearing part # 139050-2 which has a 3" outside diameter. Does anybody have a bearing # for this part number?
Looking to get this part locally in order to get the Snake on the road. Thank you for your help, Rick |
| All times are GMT -7. The time now is 01:19 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: