|
Clutch issue
Hello, I am having a slight issue with my clutch and wanted to get some others input. On normal launches it feels fine. If I cruise in a higher gear at lets say 1500 rpm and then roll into the throttle the rpm flares to about 3000 but then it catches and pulls back down and is ok the rest of the acceleration. I am assuming the clutch must be slipping but confused as to why it doesn't continue to slip even if I am at WOT. Had the clutch out not too long ago for an engine rebuild and it looked like new. Is this a feature of a centrifigal clutch ? As long as the rpm's are up it works perfectly fine. Any input is appreciated.
Thanks. |
| All times are GMT -7. The time now is 09:46 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: