| STEVE POTTS |
06-18-2009 10:00 AM |
early toploader 5 bolt bellhousing
Can someone measure a T10 or early toploader bearing retainer(for 5 bolt bellhousing) and give me the outside diameter of the retainer(where it mounts to the bellhousing)? I need this dimension to reduce the diam. of my toploader bearing retainer(for 6 bolt bellhousing) which measures 4.85". Thanks
|
| Clois Harlan |
06-18-2009 02:24 PM |
|
| STEVE POTTS |
06-18-2009 05:41 PM |
early toploader 5 bolt bellhousing
No, those sites do not have this information.
|
Anyone know the part# or casting# on the 5-bolt steel "COBRA" bellhousing, have pics of one, OR know of one available? You can email or PM, if you'd rather. THANKS!
|
| Rick Parker |
10-21-2014 05:28 PM |
"Bellhousing Cobra" on Ebay, 1ST one up is cast iron for 289/302 6 bolt
10/21/2014 4:29 pm
|
| legenmetals |
10-21-2014 05:43 PM |
bellhousing
|
Why is it that you want a part number? They, obviously, are no longer made.
|
| Jac Mac |
10-21-2014 07:24 PM |
Steve,I would suggest that the bell housing for compact Fairlane etc with 3 speed manual from 62 thru 64 that uses the inner bolt pattern that all later top loaders etc have but don't normally use would have the diameter on that front bearing retainer/clutch release sleeve that you require the dimension from, soo if you can find a 3 speed trans from one of those to measure it might help...check it against your bell housing dia to be sure...why can you not simply measure your bell housing and work off that?
|
| All times are GMT -7. The time now is 01:23 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
