Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Tri State Cobra Association (http://www.clubcobra.com/forums/tri-state-cobra-association/)
-   -   help! (http://www.clubcobra.com/forums/tri-state-cobra-association/79741-help.html)

abram99768 06-13-2007 01:53 PM

help!
 
HI
I am a new member in desparate help.
I just got the kit from classic roadsters II and I cannot figure out anything from the pictures in the manual.
I would like to start with the fuel and brake line installations.
I you could please help with some pics or simply stop by I would appriciate it
I live in Denville NJ
thank you .

Roscoe 06-13-2007 04:49 PM

What point are you at now? Is the suspension set on the chassis? Wheels and tires on? Give us a bit more info.

Although I have an A&C, you may want to check my build site at
http://www.priveye.com/cobra.htm

Roscoe

tcrist 06-13-2007 04:54 PM

The manual that I got with mine shows pretty good pictures and explain's it well. Call Don and he can help.

Terry

abram99768 06-14-2007 09:22 AM

HI and thanks for the reply.
I literally just got the kit, but with a lot of parts back ordered. I can't understand anything from the manual. I could understand better from the few photos I saw on your website. I live in Denville, NJ and my number is 973-906-5357. Is there any way you can call me. I am ready to give up and send it back. I really don't want to but I feel like I am lost.
Thanks,
Eyal

abram99768 06-14-2007 09:24 AM

Hi Terry,
My manual has fuzzy, small black and white photos. Do you have the same one? I am really stuck. When I spoke with Don, he said that he'll have someone guide me over the phone, but that is not helping me much.
Thanks,
Eyal

Roscoe 06-14-2007 09:41 AM

Have you checked the Classic Roadsters forum here? I'm sure there are some helpful threads over there.

Roscoe

tcrist 06-14-2007 09:57 AM

Search for Art Burtt in this forum an PM him. He lives in Flanders NJ. I do not know if that is close to you or not but at least he is in your state. He has a nice CR that he built and he is always ready to help. If he is close enough maybe you can pick his brain.

Terry

abram99768 06-14-2007 06:35 PM

thanks Terry, I will give him a shout out.

eyal

Roscoe 06-16-2007 10:11 AM

I sent you a PM

Roscoe


All times are GMT -7. The time now is 11:28 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: