Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Turn Ten Racing and D&D Cobra (http://www.clubcobra.com/forums/turn-ten-racing-d-d-cobra/)
-   -   FFR / TTR Billet front lower control arms (http://www.clubcobra.com/forums/turn-ten-racing-d-d-cobra/75684-ffr-ttr-billet-front-lower-control-arms.html)

mj_duell 01-05-2007 03:44 PM

FFR / TTR Billet front lower control arms
 
Just an FYI - FFR / TTR Billet front lower control arms will be available for sale in about two weeks. Final pricing has not been set yet. Here is a preliminary shot of the development piece:

http://www.clubcobra.com/photopost/d...9/cimg2886.jpg


--Mike / Turn Ten Racing, Inc.

LMH 01-05-2007 04:03 PM

Nice Mike!
Any provision for sway bar?
Larry

jeff priest 01-05-2007 04:06 PM

That almost too nice to put on a car.;)

lineslinger 01-05-2007 04:15 PM

That is an impressive looking piece of work...to bad it has to be so concealed when installed.

mj_duell 01-05-2007 04:17 PM

Quote:

Originally Posted by LMH
Nice Mike!
Any provision for sway bar?
Larry

Hi Larry,
Not yet, but we could add that in later easily. These are going to be the base to get started. When matched with our front uppers and soon the IRS upper and lower arms, it will be a very attractive suspension set. We will be having a lot of billet pieces created in the near future including front and rear uprights, billet pieces for our GT and a lot of smaller pieces for use on TTR, FFR and others.

:D

--Mike / Turn Ten Racing, Inc

LMH 01-05-2007 04:28 PM

Geez Mike, with all those suspension parts, I'd go-cart around w/o the body!
Larry

mj_duell 01-05-2007 04:46 PM

Quote:

Originally Posted by LMH
Geez Mike, with all those suspension parts, I'd go-cart around w/o the body!
Larry

I'm sure you could get away with a clear Lexan body instead! We have other stuff in the works too. I'll keep you up to date as I can.

:D

--Mike / Turn Ten Racing, Inc.

ICBomber90 01-23-2007 07:45 PM

Mike,

Very nice work! Too bad they weren't available a year ago. Knowing what I know now I would never use FFR's LCA even if they were free (yes mine were).

Now I can begin dreaming about my TTR FIA I'm going to build!:3DSMILE:

Pat

mj_duell 01-23-2007 07:54 PM

Quote:

Originally Posted by ICBomber90
Mike,

Very nice work! Too bad they weren't available a year ago. Knowing what I know now I would never use FFR's LCA even if they were free (yes mine were).

Now I can begin dreaming about my TTR FIA I'm going to build!:3DSMILE:

Pat

Thanks Pat,
The lowers are actually ready to ship, but I don't have them on the site yet.

Just and FYI for those who want the lowers, just email me or give me a call:

Billet Uppers for FFR, TTR and Mustang II (set): $535.00 + $18.00 s/h
Billet Lowers for FFR and TTR (set): $550.00 + $18.00 s/h
Uppers and Lowers for FFR and TTR (set): $999.00 + $25.00 s/h

So dreaming of an FIA hmmmmm.... We can actaully help you out with that. We put the FIA project on the back burner because of all the GT work, but I could be pursuaded to build a kit for ya. Maybe one with a billet suspension. :D

--Mike / Turn Ten Racing, Inc.

lust4fia 01-24-2007 09:41 AM

Can you tell us anything else about the FIA project? How soon will it be available?

mj_duell 01-24-2007 10:03 AM

Quote:

Originally Posted by lust4fia
Can you tell us anything else about the FIA project? How soon will it be available?

We were working on the FIA car last year before we got buried in GT orders. The FIA car we wanted to market was originally designed around an original style frame and suspension and would be very accurate. That is the part we shelved for now because of sudden parts supply issues. We do currently have an FIA body which will fit a modified version of our EVO 5 chassis and we are not sure which direction we would like to go with it. We will be build these rollers and turnkey minus kits on a behind the seens basis and I have had a lot of interest in this set-up. Not saying we will not build the original style replica we intended, but it may be awhile before its available.

EVO 5 chassis:

http://www.clubcobra.com/photopost/d...m/evo50031.jpg

:D

--Mike / Turn Ten Racing, Inc.

mj_duell 02-06-2007 10:28 AM

FFR / TTR Billet lower control arms are now available
 
Billet lower conrtol arms are now available and in stock for TTR and FFR cars. I will be updating the site this evening with pricing for the lower arm sets and complete front suspension sets.

http://www.clubcobra.com/photopost/d...medium/lwr.jpg

Pricing will be as follows after the site update:

Billet Uppers for FFR, TTR and Mustang II (set): $535.00 + $18.00 s/h
Billet Lowers for FFR and TTR (set): $550.00 + $18.00 s/h
Uppers and Lowers for FFR and TTR (set): $999.00 + $25.00 s/h


Thanks,

Mike / Turn Ten Racing, Inc.

767Jockey 02-06-2007 10:58 AM

Looks great, Mike - you guys do outstanding work. I had a dream last night that you were making Jaguar based pieces...........:rolleyes:

mj_duell 02-06-2007 11:04 AM

Quote:

Originally Posted by 767Jockey
Looks great, Mike - you guys do outstanding work. I had a dream last night that you were making Jaguar based pieces...........:rolleyes:

Can't take credit for the arms. The designer and manufacturing company are the ones that deserve all the praise. I know there is a need for Jaguar based arms and I will pass that request along.

:3DSMILE:

--Mike / Turn Ten Racing, Inc.

800hp 02-06-2007 12:02 PM

offshore or U.S. manufactured at that price point? Jim

mj_duell 02-06-2007 12:08 PM

Quote:

Originally Posted by 800hp
offshore or U.S. manufactured at that price point? Jim

Right here in the good ole U.S., Nevada as a matter of fact.

:3DSMILE:

--Mike / Turn Ten Racing, Inc.

mj_duell 02-23-2007 08:23 AM

A few more pictures of the arms:

http://www.clubcobra.com/photopost/d...9/bltlwr01.jpg

http://www.clubcobra.com/photopost/d...9/bltlwr02.jpg

http://www.clubcobra.com/photopost/d...9/bltlwr03.jpg

http://www.clubcobra.com/photopost/d...9/bltlwr04.jpg

http://www.clubcobra.com/photopost/d...9/bltlwr05.jpg

:D

--Mike / Turn Ten Racing, Inc.

samadhi 01-11-2022 03:19 AM

long shot but...
 
I realize this thread is a bit long in the tooth but:

Might these still be available?
I'm desperately searching for front Upper/lowers for an FFR.

mr bruce 01-11-2022 05:06 AM

check with Gordon Levy in Arizona, he's making them, ( I believe TTR is no more)https://www.facebook.com/levyracing


All times are GMT -7. The time now is 07:44 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: