Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Weber Tuning (http://www.clubcobra.com/forums/weber-tuning/)
-   -   Replacement idle mixture screws (http://www.clubcobra.com/forums/weber-tuning/109022-replacement-idle-mixture-screws.html)

Rick Parker 02-05-2011 03:11 PM
Replacement idle mixture screws
 
The IDA's that I have are of the Italian variety. The original idle mixture screws are steel and have a very fine point. I purchased a set of new screws which are of brass, but the tips on the new screws are not as fine, in fact thay are a little blunt on the tip. Anyone have and opinion on whether using them would reduce the adjustability of the idle mixture?

Thanks in advance:JEKYLHYDE

Gaz64 02-05-2011 03:35 PM
Rick,

Are the tapers the same and only the very tip is different?

If it's only the tips, they should work the same.

If the tapers are different, the adjustment will be different.

The blunt taper will give a more "fussy" or "faster either way".

The fine taper will be more user friendly.


All times are GMT -7. The time now is 03:06 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: