-
Weber Tuning
(
http://www.clubcobra.com/forums/weber-tuning/)
- -
MSD Distributor
(
http://www.clubcobra.com/forums/weber-tuning/82367-msd-distributor.html)
| onefastmustang |
09-21-2007 04:42 PM |
MSD Distributor
Before I put the webers on my car I had a Holley and an MSD with vac advance. the folks at top end told me that I could run the MSD with mechanical advance too just by disconnecting the vaccuum. Is this true? do I need to change any of the springs in the distributor??
|
| J Persons |
09-23-2007 09:13 AM |
The distributor you have has both vacuum and mechanical advances. You can disconnect the the vacuum, and the mechanical will still work. I'm not sure what Webers like as far as an advance rate, but most 4 bbl equipped Fords like a fast rate that is all in by about 36º total. For an MSD distributor, that usually takes one light spring and one medium spring. Most MSD distributors are shipped with a small parts baggie that has an assortment of small parts including advance springs. John
|
| zrayr |
09-23-2007 12:30 PM |
you can remove the advance unit from some MSD dist. for a cleaner look. My MSD dist came with a plate for covering the "gap" left by the advance unit removal. It was simple to remove, and runs fine without it. Of couse I don't have the benefits of vacuum advance, but my car didn't come with it anyway.
Z. Ray
|
| All times are GMT -7. The time now is 04:10 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
