|
Tuning my webers
1 Attachment(s)
So I am trying to dial in my webers to fit my 392 stroker motor.. I went out for a ride this morning with my LM1 installed.. here is what I got from a little cruise down the highway.. Looking for recommendations as to what should/needs to be changed.. I also have attached the logfile for anyone that has downloaded logworks2.
My current setup is Main Venturi: 37 Aux Venturi: 3.5 Main Jet: 155 Emulsion Tube: F7 Air Corrector: 175 Idle Jet: 75F10 Idle Jet Holder: 120 Pump Jet: 50 Exhaust Valve: 000 Needle and Seat: 2.00 http://www.clubcobra.com/photopost/d...aysession3.jpg |
| All times are GMT -7. The time now is 09:06 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: