|
3 Attachment(s)
i tryed IDA48s on my race Porsche 928.... not a good idea.... didn't got it good running because of the dead "spots"... so back to injection ;) but as you can see here, i have ITG air filters ... nice equipment , as formula racers ....
Attachment 16053 Attachment 16054 Attachment 16055 |
They are only about 25-30 each from redline. Doubt if you can build them for less. Redline also has a taller filter, but I don't remember the size. These just barely clear my hood with the spacers under the carbs.
Quote:
|
oh sorry i was going to make just 2 filters that covered 2 carbs front to back instead of a different one for each carb but i couldnt find a filter that was tall enough in the length i wanted so i will probably just go with the individual carb filters like the ones shown on page 1
thanks guys jeff |
What is the better system to use?
:confused: - AIR STACK BOOTIES (http://www2.cip1.com/ProductDetails....12%2D1630%2D14) - Velocity Stack Filters (http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT) |
I think it comes down to "what's the least ugly" vs. "What impedes airflow the least". There are a number of solutions out there & filters for a 600hp BB Cobra may not be as big of a deal as Filters for a 400hp SB when it comes to AirFlow & cutting back on a couple HP
|
Weber Air Filtering
I've been planning on making an airbox for my car similar to what was used on all the factory race cars, just incorporating a tall oval air filter around the webers that seals to the hood. The air coming into the scoop is deflected carefully down to pressurize the area around the filter, which avoids the turbulance over the stacks that causes alot of problems. The filter can be sized to have virtually no restriction... I was thinking of cutting and end off two Mopar hemi oval air filters and bonding them together. The filter element also ends up not being directly in the line of any reversion fuel that may come out of the stacks to hopefully mimimize chances of fire.
|
Quote:
I have always wanted to run a common airbox, and may still do one day. There are filter elements available from K&N etc. |
| All times are GMT -7. The time now is 06:46 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: