Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Weber Tuning (http://www.clubcobra.com/forums/weber-tuning/)
-   -   IDF Fuel pressure. (http://www.clubcobra.com/forums/weber-tuning/85934-idf-fuel-pressure.html)

carlmb 03-10-2008 07:40 PM

IDF Fuel pressure.
 
I have a 302 with Idf's and wondering what the best fuel pressure is. I did a search and found info for IDA's not IDF's. Does it vary much if I run the pressure gauge after the last carb or before the 1st carb. Thanks for your help. Carl.

Derald Rice 03-14-2008 02:48 PM

my first posting on club cobra
 
I have 48IDFs on a 302. fuel pressure is set at 3 lbs, pressure gauge is located after the fuel regulator, and before the first carb.
Derald


All times are GMT -7. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: