Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Weber Tuning (http://www.clubcobra.com/forums/weber-tuning/)
-   -   Weber IDA AN Fitting (http://www.clubcobra.com/forums/weber-tuning/92080-weber-ida-fitting.html)

priobe 10-05-2008 01:12 PM
Weber IDA AN Fitting
 
I recall seeing a setup with AN fittings on a IDA installed on a BB. The carb bodies are facing in and have enough clearance for the AN fittings.

I have tried buying AN fittings to do just that but had clearance issues.

Does anyone know were I can purchase these fittings to do the exact same thing?

Or what are you guys using for fuel connections for the IDA.

If you can post pictures that would be helpful.

Thanks

ENTDOC 10-05-2008 03:49 PM
here is my 427, I had the stainless hard lines made and used A?N fittings on the aluminum fuel blocks, Pierce manifolds has these.

http://i48.photobucket.com/albums/f2...6/motor007.jpg

ENTDOC 10-05-2008 03:51 PM
here is the 302 using AN fittings and startlite hose

http://i48.photobucket.com/albums/f2...66/fuel001.jpg

sdonnel 10-05-2008 05:26 PM
As mentioned above, Startlite is a great choice. It's made by Aeroquip (Eaton) and looks as good as you could ask for (Just look at the above photos).

ENTDOC 10-05-2008 05:32 PM
I try to use Startlite every where I can, it just looks right and is much easier to work with than stainless braid


All times are GMT -7. The time now is 02:30 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: