|
Emulsion tube explaination
I am looking to understand what exactly is meant by rich low end and lean high end on this picture.
I currently have the following Etubes on hand F7, F2, F11, F16. I took the car out for a drive last night with the wide band and it is cuising at 14.7, idle is at 14 - 15. Everything is fine up until 2300 rpm then it start to run lean 15-16. I currently have the F7 emulsion tubes. According to the chart it seems I should go with a F8 tube but I dont really understand what is meant by low end and high end Here is the chart http://www.clubcobra.com/photopost/d...sionTubes1.jpg I really dont want to change idle holder and jet since it is perfect but here are the values 100 holder 60 jet 180 air corrector F7 tube 160 main 00 bypass |
| All times are GMT -7. The time now is 03:50 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: