-
Weber Tuning
(
http://www.clubcobra.com/forums/weber-tuning/)
- -
"Booties"
(
http://www.clubcobra.com/forums/weber-tuning/97747-booties.html)
| Rick Parker |
06-19-2009 11:46 AM |
"Booties"
You might entitle this as a "Bootie Call"
Anyone have an opinion regarding the elastic mesh "Booties" that fit over the Velocity Stacks on IDA's and who sells them? I have a set of the more common thin sponge type that is sandwiched with steel mesh surrounded by a rubber ring, but they seem somewhat restrictive.
Thanks
|
| Snakebit |
06-19-2009 12:04 PM |
Rick, take a look in my gallery. Pierce sells the stainless mesh filters for $35 a pair. They work great. no restriction. Inglese sells the nylon booties that look like they were cut out of a hookers black panty hose. They don't recommend them for the steel air horns as there is no lip for them to grip. They work better on the spun aluminum air horns.
|
| Rick Parker |
07-07-2009 10:43 AM |
bump............
|
| bobcowan |
07-07-2009 02:34 PM |
Quote:
Originally Posted by Rick Parker
(Post 959577)
I have a set of the more common thin sponge type that is sandwiched with steel mesh surrounded by a rubber ring, but they seem somewhat restrictive.
Thanks
|
I have those for my car, but don't use them much. I tuned the car with open stacks. Put the Tea Strainers on, and ran it on the dyno for a fun dyno day. Power was down, and mixture was rich. I popped the "filters" off, and immediatly gained a perfect AF ratio, and gained 100hp. Yes, that's right - 100 dyno proven hp. Now, some of that could be gained back by leaning out the mixture appropriatly. But you'de never get 100hp back. They're just too restrictive.
I really like the steel mesh one's from peirce. I' definatly looking at buying those in the very near future. |
| All times are GMT -7. The time now is 02:10 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
