|
ok Emulsion tuse please help
Ok,
I am curious to find out if the F-16 Emulsion tube used on the 48 IDA is richer or leaner than the F11 tube. And if so how is this determined? |
Looking at my charts, the F16 has only one series of holes about 2/3rd of the way up from the bottom, but is .2 mm larger in diameter than the F11. I think the F11 with its multiple levels of holes, would be more "Flexible" in a street driven car. Where the F16 might be better with foot to the floor.
|
| All times are GMT -7. The time now is 06:45 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: