Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Western States Cobra Group (http://www.clubcobra.com/forums/western-states-cobra-group/)
-   -   FIA Cobra (http://www.clubcobra.com/forums/western-states-cobra-group/121179-fia-cobra.html)

428cj6v 06-23-2013 10:39 AM

FIA Cobra
 
Hello all, Are any owners of a FIA cobra that is set up for a tall person going to be at SAAC in Fontana July 6th?

Brett

mrmustang 06-23-2013 10:45 AM

Quote:

Originally Posted by 428cj6v (Post 1249894)
Hello all, Are any owners of a FIA cobra that is set up for a tall person going to be at SAAC in Fontana July 6th?

Brett

How tall are you? I k ow of at least one FIA owner at 7 feet tall. Depends on your dimensions I guess.


Bill S.

*13* 06-23-2013 07:03 PM

Both Unique & ERA can make adjustments to get some taller folks into cars. I'm about 6' & have room behind the seat in my stock ERA car. Unique is the company who have built for a 7' dude.

428cj6v 06-24-2013 06:42 AM

I have spoken with the guy that is over 7" tall and has size 16 feet. He owned the FIA cover car on the unique web site. I have been wanting one for years. I am 6'4", 240lbs. I want enough room to slide my left foot past the clutch peddle and stretch out my leg. I am leaning toward a ERA but have not seen a Unique yet.

*13* 06-24-2013 07:04 AM

You should call both companies & talk with them. Take a trip to visit both, if you can. Or, at least, find each of the cars & get a good look at them. They are both well made, different design from the other. A cobra is a small car. A friend of mine is 6'4", heavyset. We got him into the pass seat with the top on. Wasn't easy to get him in but, once in he seemed to fit ok. I think the ERA website has a place where you can check interior dimensions with your inseam ??? Been a while, sorry...

tkb289 06-24-2013 09:46 PM

Brett,

I won't be at SAAC on July 6th, but can give some information on the setup for my ERA FIA.

I am 6'-4", 230 lbs and fit reasonably well into the car. The modifications ERA made to help me 'fit' are the following:

- The dash was shortened height wise about 3/4", effectively raising the bottom edge of the dash. This resulted in the dash having the gauge that normally sits to the left of the tach, being moved to the right side along with the other four gauges. A 'street' drop dash setup was out of the question for me.

- The roll bar was raised up about a bar diameter in height.

- The foot pedal set was moved as far forward as possible

- I went with the 427 street seats, one with the standard rubber membrane base and one with a shaved foam base. Both are about the same in terms of comfort and settling into the seat. I did use the adjustable seat track, I gave up about 3/4" of the seat being lower, but having the adjustably was worth it.

I am not sure how the pedals are hung on a Unique, but ERA has the clutch and brake pleads that come up from the floor. In my car, there is not enough room to slide one's left foot past the clutch pedal assembly. Maybe with some tweaking by ERA to the pedal spacing, it can be done. With a car that has the pedal set hung above the floor it's probably easier to stretch out one's left leg.

As Hyde suggested, best bet is to call or visit Unique and ERA. If you are up in the Bay Area let me know, you are welcome to try my car on for size.

Keep in mind these are 90" wheel base cars, so most folks over 6 feet will not be 'comfortable' per se, but once you are behind the wheel and rumbling down the road, who cares ;)

Best of luck with your project!

- Tim


All times are GMT -7. The time now is 04:05 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: