|
48IDA Weber Carb Linkage
I have SPF1593 with a small block Ford 351W based block. I also have an Inglese built 48IDA Weber induction system. On my carb/manifold setup, the linkage is a side pull system. The linkage passes between the two drivers side carbs and places the bell crank just over the inside edge of the valve cover. Does anybody have or know of someone that has this exact linkage setup ? I would like to know and see what other Superformance owners have done to the factory (OEM) linkage that runs parallel to the firewall along with the link that goes from the firewall linkage out to the bellcrank for the carbs. I seem to be having a linkage geometry problem which will only allow me to open the throttle plates half way. Any good information will be greatly appreciated. I'm so close to firing this thing up for the first time that I can't sleep. Besides I think my girlfriend is going to leave me because she has not seen me for two weeks!!
|
I think you need to talk to Inglese and see if they don't have another setup. Now mine is a 427 so its different for the small blocks. Tim Black has had the same problem I believe with his linkage opening up differently...its all in how you have the linkage running.
Matt |
Linkage for my 48IDA
1 Attachment(s)
tommyboy, we had to replace Inglese's linkage system. We gave our best but we were not able to synchronize the carbs (throttle valves). Therefore we decided to design a new linkage system that is working perfectly !!! Hope this pictures might give you some ideas.
Regards, Walter |
1 Attachment(s)
pic #2
|
1 Attachment(s)
pic #3
|
| All times are GMT -7. The time now is 04:46 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: