cobrajeff
Tue December 22, 2009 8:00am
Rating: 10
|
Hood with aluminium insert
|
|
428street
Mon February 1, 2010 6:37pm
Rating: 10
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
Trunk hinge support
When I got this kit the trunk lid and hood were not attached to their frames. So before joining the two together I figured I would give the hinges something solid to bolt to...and also add some strength. The holes are 5/8 and I am making some press fit threaded collars to put in the holes for 3/8 bolts.
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
Rating: 1
|
Hood hinge support
Same thing on the hood. I am going to glass in the aluminum frame so that its solid with hood.
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
hood support close up.
Here you see the steel threaded collars pressed into the 5/8's holes. I didnt want to thread the aluminum for fear of the threads possibly pulling through.
|
|
SD5805
Tue April 6, 2010 4:58pm
Rating: 10
|
Vintage AC Cobra Racing Look
BW of the Cobra for a Vintage Look
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
Finally done!!
I feel like I have turned a corner with getting the hood and trunk hinged and functional. I still cant see the light...but at least I can see the next corner.
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
Radiator mounted too!!
Got that done this weekend too. Well it was done but after I got the hood done and had a good freind come over and take a look...I decided to move it a little...Thanks for the input Russ.
|
|
52chevyred
Mon May 3, 2010 3:35pm
|
Hood Installed
Just got the hood installed. Got to cut the "excess" off the handles.
|
|
Ray Ogden
Tue May 11, 2010 8:32am
|
Under Hood View
427 side oiler Bored and Stroked to 492 cu in
|
|
krausewich
Wed May 12, 2010 6:08am
|
Adding the hood jamb tubes and supportwork.
Adding the hood jamb tubes and supportwork.
|
|
KarlCSX2498
Sun May 23, 2010 4:38pm
Rating: 10
|
427 Cobra Project Car May '10
All the moving panles, hood, trunk & doors are on and fit nice. Now final details on the alum body and add bumpers & side pipe shields for inspection.
|
|
KarlCSX2498
Sun May 23, 2010 4:38pm
Rating: 10
|
progress photo
everything is finished execept the hood, trunk lid & doors.
|
|
Double Venom
Sun May 30, 2010 8:49am
|
Oversized CR Hood-prepping for a mould-rear
|
|
