blueovalfanatic
Tue September 5, 2006 1:06pm
Rating: 10
|
heads
Heres my makeshift picture recording the readings for each combustion chamber. Still dont know if I will go with these heads, or splurge for some aluminum ones, but here they are up to this point.
|
|
Unique 289_FIA
Tue December 5, 2006 3:42pm
|
Classic_Chambered_exhaust_black_Medium_
New exhaust using Classic Chambered mufflers, painted black.
|
|
cobrajam
Sun November 18, 2007 5:53pm
Rating: 1
|
Edelbrock 6008 combustion chamber
2.25in intake, 1.75in exhaust, 11/32in stems
|
|
thorconstr
Sun June 1, 2008 10:31am
Rating: 10
|
|
fkemmerer
Sun July 20, 2008 11:40am
|
IAC Chamber Details
This picture shows the internals of the IAC chamber and plumbing under my TWM intake. The IAC motor mounts on a fitting/cover assembly and connects to the common reservior shown here.
|
|
dont
Thu February 19, 2009 11:30am
|
side pipes
classic chambered muffler
|
|
dont
Thu February 19, 2009 11:39am
|
side pipes
Tig welding the new classic chambered 3" ID mufflers onto existing collector and turn out
|
|
nanard289
Sun January 29, 2012 11:52am
Rating: 6
|
piston modification
I made one additional quench chanel on the piston to improve exhaust valve cooling (at the end of compression cycle) and to scavenge the combustion chamber (at TDC during exhaust cycle)
|
|
TUF-427
Sun May 5, 2013 3:45am
|
|
TUF-427
Sun May 5, 2013 3:45am
|
|
RET_COP
Sun September 1, 2013 11:06am
Rating: 10
|
20130831_110333
Classic Chambered cobra pack next old exhaust
|
|
RET_COP
Sun September 1, 2013 11:06am
Rating: 10
|
20130831_110359
Classic Chambered exhaust Mod for unobstructed flow 3 1/2 collector to 3" muffler ID
|
|
RET_COP
Sun September 1, 2013 11:10am
Rating: 10
|
20130831_110555
Classis Chambered Cobra Pack ID
|
|
RET_COP
Sun September 1, 2013 11:35am
Rating: 10
|
20130815_050223
Classic Chambered Flow Mod 3 1/2 to 3
|
|
RET_COP
Sun September 1, 2013 11:35am
Rating: 10
|
20130815_050304
Classic Chambered Flow Mod 3 1/2 to 3
|
|
