Quote:
Originally Posted by undy
FEs traditionally have very h-e-a-v-y valve trains, not real conducive to a high-winding hydraulic anything.
|
If, after carefully breaking in my solid flat tappet cam, choosing reasonable ramp rates, high quality components, always using Brad Penn and adding the original GM EOS supplement, plus sending my
oil off to check the
zinc/phos. content (which usally came back over 1500ppm)... if I wiped a lobe/lifter I would indeed throw in the towel and use a hydraulic roller. But I believe that quality components, reasonably ramp rates, and high
zinc/phos
oil will let your solid flat tappet cam outlive you. I don't know what would be in the current mix that would cause otherwise.