Not Ranked
Quote:
Originally Posted by dlampe
Well, it looks like I am going to build a 487ci Aluminum pond 427fe. Heres the situation. I have weber's on the shelf with no intake and I have a Performer RPM on the engine with no carb. The carb will cost as much as the intake and the linkage. Would you go for the Weber's and deal with the tuning?
|
I think you really need to get the Berg 58mm webers if you want to make power above 5000 rpms. So, if you want webers sell the 48's, get the berg 58's and a BT weber intake, like the one I have which is canted.
The intake on the left is the BT 48 IDA intake. The intake on the right is a HM 58mm Downdraft intake.
__________________
"After jumping into an early lead, Miles pitted for no reason. He let the entire field go by before re-entering the race. The crowd was jumping up and down as he stunned the Chevrolet drivers by easily passing the entire field to finish second behind MacDonald's other team Cobra. The Corvette people were completely demoralized."
Last edited by Anthony; 12-26-2009 at 08:20 AM..
|