[Merv and Sharon]

I'll be able to tell you soon about the Mass-Flo. My motor sits lower Greg, as the top of the plenum is below the bonnet level - and doesn't extend into the scoop at all.

I didn't get an ignition controller from MSD. I did get a new TFI module with my distributor and I also renewed the throttle position sensor. The correct connections to the alternator were quite hard to find (mine were missing) but when I did it seemed to stop the heating that these connections are famous for.

I would either borrow some 'bumpers' or leave them off completely as others have said.

Merv