2kwik4u,
I have the dynalites as well. I've been on wilwood's page before trying to figure this out, but could you explain a little bit more about how to tighten the balance bar assembly up. The bolt that runs through the middle is tight, but the whole thing moves. I've gone in and adjusted the MC rod lengths and balance bar but as you can see from my pics there is a ton of slop, notice the angle of the balance bar. I can move it without effort from one extreme to the other. Hopefully the pictures will help. On the pics, I made no adjustments between shots, just moved the balance bar assembly from one extreme to the other. Thanks
