Not Ranked
Quote:
Originally Posted by elmariachi
And just to confirm, these float levels are with the bowls removed and inverted, and measured from the bottom of the inverted inside bowl surface up to the bottom of the inverted float?
|
Yes. You're measuring the clearance from the top of the float, to the underside of the roof of the float bowl, but in an upside down position to simulate the float closing off the needle/seat.
__________________
"After jumping into an early lead, Miles pitted for no reason. He let the entire field go by before re-entering the race. The crowd was jumping up and down as he stunned the Chevrolet drivers by easily passing the entire field to finish second behind MacDonald's other team Cobra. The Corvette people were completely demoralized."
|