Not Ranked
You have to unscrew the bracket holding the float to the back of the bowl, pull the float out, and slightly bend the tab that's pushing on the needle. Put it back together, and check a measurement. If it's not right, take it apart again, and rebend it, put it back together and measure, and repeat until measurement is right. Have Fun.
__________________
"After jumping into an early lead, Miles pitted for no reason. He let the entire field go by before re-entering the race. The crowd was jumping up and down as he stunned the Chevrolet drivers by easily passing the entire field to finish second behind MacDonald's other team Cobra. The Corvette people were completely demoralized."
|