[MaSnaka]

DV, I only see one pivot hole and one rod hole. Looks like the pedal arm has a bushing welded to each side of it with a bolt being used as a pivot running through it. There are some other holes in the box but none even close to what looks like an alternative place to go. Any change there would seriously throw off the aligment and depth of the pedal in relation to the master cylinder rod. I measured a distance of 3 3/4 " from the pivot to the MC rod center to center. Does that sound about right?

I don't know the bore of my MC but I do have part number stamped on the bottom of it. Does it sound familiar or indicat what bore I have? 29922 and 30371 Both sets of numbers appear on the bottom of my MC.

Thanks,
John