High tech comes with a high price, knock yourself out. Don't forget the $6,000 (or more) after market fuel injection, the computer and the dry sump while your at it. If your going to compare an LS7 to a side oiler...
$1,500 plus MINIMUM for the best after market hydraulic roller set up MIGHT get you close to 6,500 rpm. Cam, lifters, retainers, springs, etc.
A flat tappet set up costs a FRACTION of that, will deliver more horse power, turn higher rpm's and live a long life on the street. WITH a single naturally aspirated carb, wet sump and all that other "junk" in an antigue design from the 60's. Commonly known as a "Cobra". Just keeping the faith baby!
