Not Ranked
ATI is the best - the FE one is roughly 7 degrees off on the TDC marking and uses a Chevy pulley bolt pattern. More race car quality at just under $400. I have no experience with BHJ, but they should be comparable.
The next one I would use is a Romac - nicely made Australian piece availalble in either a reproduction 427 (single timing marking and a pulley) or a fully marked aluminum ring model. Both are really decent parts that use FE mountings, at just under $300.
The Professional Products stuff is Chinese made, inexpensive, and fine for a budget oriented street build. Not in the same quality league as the ATI or Romac.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|