Not Ranked
You will need to nibbl on the mounting holes a bit with that pulley and the ATI. We use the Bridgeport to do it 'cuz we have one - but you can do it by hand with a die grinder or whatever. About 1/2 a hole diameter toward the outside should do the job.
__________________
Survival Motorsports
"I can do that....."
Engine Masters Challenge Entries
91 octane - single 4bbl - mufflers
2008 - 429 cid FE HR - 675HP
2007 - 429 cid FE MR - 659HP
2006 - 434 cid FE MR - 678HP
2005 - 505 cid FE MR - 752HP
|