Not Ranked
I had a dropped base made for the big cobra oval air cleaner on a 427 small block stroker that really worked well. I'm building a 496 KC motor right now and bought a 9 inch setup with turkey pan just like yours. I'm putting a Eldebrock Victor (Single Plane) on the motor but Keith is going to cut the carb base down by a .5 inch so I'm hoping it will all clear. If not I'm in for a drop base if it would work but I also think it's just too small to clear the float bowls.
__________________
Gary
CAV GT40
Last edited by gsharapa; 08-19-2010 at 04:12 PM..
|