I think we have a misunderstanding. I don't know what you mean about the carb surface bud. Sorry if I did not explain well enough.
What the the tranny owner needs is measurement's for the shifter location. He wants me to measure from the back of a FE engine to where where we like the shifter to be. I figured I would give him four.
1- straight down from the dash to the tunnel.
2- just ahead of the middle of the tunnel.
3- center of the tunnel.
4- just past center of the tunnel.
That way he'll get a better idea of the layout of the cockpit and where the shifter can be located.
What would be great, is photo's of the cockpit with a tape measure laid on top of the tranny tunnel, and photoed well enough to actually see & read the numbers.
I hope I've explained better of what we need.
