Quote:
Originally Posted by RICK LAKE
Sam ERA had to modify my cobra for 17" wheels. The body as been trimmed and fillers to clear. The other thing is to talk to Bob about the P/S setup. He didn't have the numbers of the rack in my car. I do have the specs. 2.0 ratio. 17" length. The other problem is there are only a couple of 17" tires with low wear numbers over 200. Pilots are 220 and cost through the eye sockets. I will see if I can find a # of the appleton rack for you. Rick L.
|
Dunno, Rick .. my chassis is a "Gen II" post ser # 731, which had numerous changes from the earlier version. The 26.5x10 Billboards fit, with an occasional rub. They are about 12.5" section width in back. The 26.5x8.0 are about 11" wide in front. I'm using that as a "do not exceed" template.
I'd appreciate the info on the power steering rack!
Sam