Not Ranked
I will chime in here with my current setup. It seems to be working fine right now as tested with the LM1 A/F meter.
462 Aluminum Pond block. 10 deg. canted intake.
Chokes 40mm
Idle holder 100
Idle jet 65
F7 tubes
4.5 Aux venturis
Mains 170
Air correctors 150
Floats are set to 4 mm with a 24.2mm needle/seat measurement.
I am still testing so this could be a little rich but safe.
Roller cam
Dur @ .006 is intake 303, exhaust 311
Lift is intake 654, exhaust 649
LSA of 112
__________________
High Maintenance Racing Team
Run & Gun 2003 - 2013
|