Quote:
Originally Posted by DaveW
Yep, thanks Gregg, that would be great, when you do, could you also confirm the offset, Ozwheels is adamant that Ian's spec for the front is 1/2" out, 5.5" vs 6" offset,
Thanks and regards
Dave
|
no problems. BTW, I reckon my offsets are pretty well correct as I think my wheels/tyres etc site nicely in/under the guards.
Will measure front and back.
One thing that is very tight is the bolts on the perimeter of the rear wheels - they were interfering with my rear caliper and I had to grind them down. (two by two - took 4 hours)
Anyway will measure up and post soon.
Rgds
Gregg