Not Ranked
Beauies,
I have the current round tube CR chassis and can confirm the mounting points are all there already. Even the harness points. Regarding dish on the rear wheels, you get about 4 inches. looks ok. The underbody exhaust is a bit of a challenge but a good exhaust guy would figure it out. Having the inner guards, footwells and tunnel all done as part of the body I thought was quite good as I registered mine prior to doing the interior and exterior paint etc.
In the end though, as Baz has said, it adds up to nought if you cant register it.
Good luck, I hope the NSW ICV enigneering and registration process gets cleared up soon as it appears to be pretty screwed at present.
Rgds
Gregg
|