[ERA Chas]

-and all that will work perfectly. The keys are the single spring, immediate start and 60PSI. Broke mine in with a coat of black moly on lobes and lifters, inner spring, Kendall 50wt, and 2000RPM for 20 or so minutes. Whatever ZDDP was in Kendall then was it-no science lab chemical debates then. No flat lobes or nightmares in 2 decades either.
Guys invent a lot of myths and BS because of failures they heard/read about. All those failures were because the installer varied from or omitted the simple steps Brent will do-or the cam metallurgy was bad.


.